Does it take time to open a laptop? Is it possible to run the program openly ? Is there only reloading when you open too many taps in the browser ? If you are facing such problems, then there may be a sign that the RAM of the laptop needs to be upgraded.
Random access memory plays an
important role in the performance of the computer. When it starts to full, it starts sending data to the
hard drive. As a result, the processing work slows down. And its effect is seen in the
performance of the computer.
The solution
is to upgrade the RAM. Understanding in a simple way means adding more RAM to
the computer. But check the status of THE RAM being used on the computer
before.
How to check the
status of RAM
Some people add rap as soon as
the computer is a little slow. But in the end, because the computer is slow,
there is no RAM. When this happens, it may be wise to look at the status of the
RAM being used on the computer before you buy a new RAM. For this, follow the
following procedure:
- Open the task manager. Press Ctrl
+Alt+Delete at once.
Or you can also search by clicking on the Windows button.
- After this, click on the
Performance tab. There you can see options like CPU, memory, disk etc. Among them is the
memory we need. There you can see the actual details of the RAM currently in
use. That is, the use of real-time RAM can be seen.
After this, you have to see
whether ram can be added to the laptop or not. Because rap cannot be added to
all laptops. For this, you can use tools like 'Crucials Memory Advisor'. Where
you can know the type of RAM that can be used on your laptop, their maximum capacity, speed. After knowing the type
and speed of THE RAM to be added in this way, you have to buy. Ram can also be
purchased from online platforms like NeoStore, ITTE, Daraz in Nepal.
After purchasing the RAM, you
can also keep it on your laptop. According to each brand and model, the
internal design of the laptop can vary. However, here's how to upgrade the rap
that can be applied to most laptops:
- Turn off the laptop. And make sure that the power goes to
the laptop from anywhere.
- Turn the laptop back and open
the base plate. You may also need to open the screws in this process.
- Usually the RAM is placed
inside the clip next to the CPU. Find that place.
- Now remove the old RAM in the
clip. However, what you
need to remember is that you have to hold the RAM in the side.
- This is how to keep the new
RAM in the slot. In doing so, the RAM should be well seated in the slot.
- Now lock the clip when you are
sure that the RAM is sitting properly.
- Place the base plate of the
laptop again. And apply a screw.
- Turn on the laptop. And, go to
Settings>System>About. You can see a new RAM installed there.
- If there is any problem, repeat the above process and
keep the RAM well so that it can sit in the slot.
However, if you are not a bit
tech-friendly, then you can go to the technician and do all these things.
